TruAudio : : SUB Series

4" Round
5" Round
6" Round
8" Round
Single Speaker Stereo

5" Rectangle
6" Rectangle
8" Rectangle
HT Series

In-Ceiling Revolve 6"
In-Ceiling Revolve 8"
In-Wall Home Theater
Satellite Speaker Systems
CT Series
BadBoy Series
BLU Series
TruCinema
P Series
ProHT Series
Subwoofers

SUB Series Powered
Red Mountain Subs
In-Wall Passive

Outdoor Speakers
Rock Speakers

StreamSound
SoundTractor

Mono Channel
12 Channel

Knob Controls
Slide Controls

Dummy Speakers
Acousti-Foam
Back Boxes
In-Wall Enclosures
Speaker Stands

C-612
C-iDock
C-4.4

Note: Red Mountain subwoofers are custom speakers and are built to order. Please allow approximately one week lead time before shipment.

RM-10 Sub

High-strength, light-weight, black anodized aluminum cone
Huge motor structure, multi-layer voice coil, and enormous magnet system allow for a ton of low frequency output at high volumes for extended periods of time
300 watt powerhouse amplifier uses a specially designed, heavy-duty transformer to minimize unwanted heat build-up which ensures the amps will drive harder, longer, and more efficiently
Real wood veneer enclosure with tons of internal bracing
The enclosure is designed, engineered, and hand built in St George, Utah

Speaker Specifications

Speaker Type: High-end powered subwoofer

Enclosure Design: Front-firing, front slot port, internally braced

Driver: 10” black anodized aluminum cone, cast basket, long excursion, 2.5” 2-layer voice coil.

Power, Class A/B Amp: 300 watt internal amplifier

Frequency Response, Low Pass: 29 - 250 Hz (+/-3 dB)

Input Sensitivity, Low Level: 65 mV @ 100 Hz

Input Sensitivity, High Level: 2 V @ 100 Hz

Inputs: Line level RCA, speaker level w/ banana plugs

Outputs: Line level RCA, speaker level w/ banana plugs

Controls: Phase control 0 or 180, low frequency adjustment, crossover bypass

Amplifier Protection: Output protection circuit with relay

Cabinet: Real wood veneer,
BUILT IN ST. GEORGE, UTAH

Cabinet Dimensions:
   14 5/8” (371.48 mm) H (including feet)
   14 1/8” (358.78 mm) W
   15 1/4” (387.35 mm) D (including grill and amp)

Grill: MDF frame w/ black speaker cloth

Colors Available: Black in stock, other colors available with 3 week lead times

Click on the photo for a larger image

RM-12 Sub

High-strength, light-weight, black anodized aluminum cone
Huge motor structure, multi-layer voice coil, and enormous magnet system allow for a ton of low frequency output at high volumes for extended periods of time
500 watt powerhouse amplifier uses a specially designed, heavy-duty transformer to minimize unwanted heat build-up which ensures the amps will drive harder, longer, and more efficiently
Real wood veneer enclosure with tons of internal bracing
The enclosure is designed, engineered, and hand built in St George, Utah

Speaker Specifications

Speaker Type: High-end powered subwoofer

Enclosure Design: Front-firing, front slot port, internally braced

Driver: 12” black anodized aluminum cone, cast basket, long excursion, 2.5” 2-layer voice coil.

Power, Class A/B Amp: 500 watt internal amplifier

Frequency Response, Low Pass: 24 - 250 Hz (+/-3 dB)

Input Sensitivity, Low Level: 65 mV @ 100 Hz

Input Sensitivity, High Level: 2 V @ 100 Hz

Inputs: Line level RCA, speaker level w/ banana plugs

Outputs: Line level RCA, speaker level w/ banana plugs

Controls: Phase control 0 or 180, low frequency adjustment, crossover bypass

Amplifier Protection: Output protection circuit with relay

Cabinet: Real wood veneer,
BUILT IN ST. GEORGE, UTAH

Cabinet Dimensions:
   17 5/8” (447.68 mm) H (including feet)
   17 1/8” (434.98 mm) W
   18 3/4” (476.25 mm) D (including grill and amp)

Grill: MDF frame w/ black speaker cloth

Colors Available: Black in stock, other colors available with 3 week lead times

Click on the photo for a larger image

RM-15 Sub

High-strength, light-weight, black anodized aluminum cone
Huge motor structure, multi-layer voice coil, and enormous magnet system allow for a ton of low frequency output at high volumes for extended periods of time
600 watt powerhouse amplifier uses a specially designed, heavy-duty transformer to minimize unwanted heat build-up which ensures the amps will drive harder, longer, and more efficiently
Real wood veneer enclosure with tons of internal bracing
The enclosure is designed, engineered, and hand built in St George, Utah

Speaker Specifications

Speaker Type: High-end powered subwoofer

Enclosure Design: Front-firing, sealed cabinet, internally braced

Driver: 15” black anodized aluminum cone, cast basket, long excursion, 2.5” 2-layer voice coil.

Power, Class D Amp, ICE: 600 watt internal amplifier

Frequency Response, Low Pass: 20 - 220 Hz (+/-3 dB)

Frequency Response, LFE: 20 - 230 Hz (+/-3 dB)

Input Sensitivity, Low Level: 150 mV @ 100 Hz

Input Sensitivity, High Level: 3.5 V @ 100 Hz

Inputs: Line level RCA, speaker level w/ banana plugs, LFE line level RCA

Outputs: Line level RCA, speaker level w/ banana plugs, LFE line level RCA

Controls: Phase control 0 or 180, low frequency adjustment, auto-on

Amplifier Protection: Output protection circuit with relay

Cabinet: Real wood veneer,
BUILT IN ST. GEORGE, UTAH

Cabinet Dimensions:
   17 3/4” (450.85 mm) H (including feet)
   17 1/8” (434.98 mm) W
   18 1/4” (463.55 mm) D (including grill and amp)

Grill: MDF frame w/ black speaker cloth

Colors Available: Black in stock, other colors available with 3 week lead times

Click on the photo for a larger image

© 2010 SoundVision, LLC. All rights reserved.
No part of this site may be reproduced in any form without the permission of SoundVision, LLC.